E-Z Brace

Never wrestle with your gate again! You can remove sag in gate by transferring some of that gravity load over to the hinge side of the gate with a cross-brace. A compression cross-brace takes weight from the top bar and transfers it by pushing down against the bottom hinge. The E-Z Brace was born out of a common need to fix sagging, dragging, sticking wood fence gates. We at E-Z Brace decided that constant call backs to re-adjust the customers fence gate was eating away at every bodies bottom line. Our ingenuity kicked in and we created what is the #1 gate brace on the market. We have designed our E-Z brace to come out of the box and onto the gate. Pre-assembled from the factory, our E-Z brace has two attached pieces of angle that swivel and allow you to mount either on the right-side or left-side, depending where your hinges are, and can be applied to virtually any wood fence gate application. Our E-Z Brace is installed in just minutes. In the event if your gate sags a little due to the posts or hinge hardware adjusting, just remove the two self-tapping metal screws, adjust the gate up and reinstall the screws. Its that simple! E-Z Brace installs easily to fit on almost all wood fence gates. Adjustable to fit a variety of gates, up to 3 - 6 feet (wide) & 6 - 8 feet (height)